- Contact Person : Mr. Fan Martin
- Company Name : Yuyao Jiahuan Plastic and Chemical Imp & Exp Co., Ltd.
- Tel : 86-0574-62550599
- Fax : 86-0574-62656185
- Address : Zhejiang,Yuyao,Room203. NO4 building,F district, Chinese plastic city
- Country/Region : China
- Zip : 315000
Porcelain Kettle JH-PK-1012
Detailed Product Description
Kettle:
1. Graceful streamline design with environmentally friendly ceramic outward appearance and its elegance, delicacy and luxury fully present the noble qualities.
2. With concealed stainless steel heating base, innoxious, healthy, and convenient to clean.
3. Quick and convenient, it will take 5-6 minutes to boil the water 100%
4. Use new thermostat, safe and reassuring, the power will be off automatically when water is boiling and no water in the kettle.
5. The heating base could be revolved 360 degree, put it freely
6. Classic refined decorative pattern.
Base:
1. Concise and practical with complete function.
2. The kettle can be placed freely with a 360-degree rotation.
Operational guidance
1. Fill the kettle with water to avoid the dry heating. The maximum capacity for water is not allowed to exceed the indicated maximum water line which is 18 mm lower to the spout.
2. Do not forget to put the lid back on the kettle before press the switch or the kettle wont shut off automatically.
Direction for use
1. Place the kettle on a smooth surface.
2. During use, the kettle should be put on the base and the power cord should be plugged into the power socket. Push down the switch to turn on the indicator light and the kettle begins to heat up.
3. When the water is being heated, the power is still on. The kettle can not be removed from the base.
4. The switch will cut off the power automatically and also the light will be off when water boils.
5. Lift the kettle from the base and pour the hot water for drink.
6. If another boiling is needed, you should connect through the switch again after one minute. Pressing on the switch forcibly will cause damage to the electric-thermal control system.
7. Place the kettle on the base when not in use. It wont work again until the switch is turned on.
Cleaning and maintenance
1. For the increase of service life, you should clean the mineral sediment inside the kettle regularly.
2. cut off the power before cleaning
3. do not put the base into water
4. Mix the vinegar and water by 1:2 ratio and pour them into the kettle then switch on to work until the kettle cut off automatically.
5. Let the mixed liquor stay in the kettle for 24 hours and then replace them with fresh water to start working again.
6. The furring and acetin will go away with the fresh water. At last cleaning the inside surface of the kettle with fresh water. If needed, repeat the above-mentioned procedures.
7. If malfunction occurs during use, remove the kettle from the heating base and discard the water to let the kettle cool down to room temperatures in order to detect the fault or clean it.
Security guide
1. Please read this manual carefully before use.
2. Please check the voltage to ensure that it is in accordance with the rated voltage of the kettle. If the power cord is damaged, it should be replaced with the same appropriative cord by professionals. The power that the plug is connected to should have ground protection.
3. The kettle can only be used with the assorted base.
4. Do not let the power cord hang at the sides of the table or be exposed to high-temperature objects.
5. When filling the kettle, the water can not be beyond the maximum water mark, which otherwise will bring about the spouting of the boiling water.
6. This kettle adopts the safety switch which will cut off the power automatically when the water is in shortage or there is no water.
7. Do not immerse the kettle into water for cleaning for fear that it might cause damage to its electric elements.
8. When pouring, filling and cleaning the kettle, it must be detached from the base.
9. Throw out the boiled water after the first use for it will have peculiar smell for the first time. If the smell wont disappear, add two teaspoons of soda to the water and boil it to discard again.
10. Please cut off the power if the kettle wont be used for a long time.
Approval:VDE PLUG GS/CE/EMC/ROHS/LFGB/PAHS Chinese controller |
Specification: |
1. 220-240V AC 50-60Hz 1300-1500W |
2. Capacity: 0.8liter |
3. Stainless steel heating plate |
4. Dry boil protection |
5. Automatically turns off when water boils |
6. With on/off switch indicator light |
7. Made of Ceramics |